The vertical solution provides a much smaller foot print which takes up a limited amount of surface space as compared to the horizontal solution. In addition, vertical loading of the part eliminates part and structural deformation, as well as any bending in the reference centers and helps part dragging in dynamic applications.

The bench, engineered for crankshafts weighing more than 6 Kg, can also check camshafts, gear shafts, rotors and axle shafts.

The measuring components are comprised of the Marposs measuring transmission devices belonging to the AMA line (made of non-magnetic stainless steel) and Red Crown pencil probes. Other cell types can be used in special applications. The bench gauge is dedicated to the inter-operational inspection of a single part type after end face milling, turning, pin bearing milling and grinding. The work piece is loaded manually or by a manual gantry between centers in the vertical position. The centers are either fixed (static measurement) or motorized (dynamic measurement) and the measuring stations are brought onto the part by manual pivoting arms.

To know more follow the link: Vertical Bench for Shaft Inspection M57V

It is a final or inter-operational inspection bench gauge developed to accurately check all the final typical characteristics of the connecting rods.

It can be tailored to inspect a single part type or configured to be easily retooled for different part types. The dimensional and geometric checks that can be performed are:

• Pin and crank bore internal diameters
• Thickness
• Ovality
• Taper
• Center distance
• Squareness of bores to faces
• Twist
• Bend

To know more log on to: Manual Gauging Station for Multidimensional Inspection of Conrods