Precision Measuring Systems » measuring system

Advanced Line of Measuring Plugs

marposs — Sun, 20 Sep 2009 20:16:35 +0000

M1 STAR™ MBG
Manual Mechanical Bore Gauge with Mechanical or Electronic Dial Indicators or Pencil Probe

The highly advanced line of measuring plugs for inspecting bore diameters: M1 Star™

* The mechanical transmission measuring system can be interfaced with any pencil probe, dial or digital indicator.

* Application range is 3 to 300 mm (0.12 to 11.81″). With an extensive range of accessories, the M1 Star™ MBG can be configured to measure at depths of more than 500 mm and measure bores that are perpendicular to the axis of insertion.

* The wide range of modular components makes it possible to configure the bore gauge to meet all measuring needs.

* The bore gauge can be totally retooled or reconditioned by simply replacing the nosepiece and contacts. A mechanical positioning system automatically ensures alignment between the nosepiece and contacts.

* Due to the mechanical transmission system having an extensive range of accuracy, only one master is needed for zero setting.

* The Mechanical Bore Gauge is accurate, robust and reliable. Only periodic cleaning of the mechanical measurement-transmission area is necessary.

To know more about the M1 Star™ line of measuring plugs

Optoquick Set – Optoelectronic Flexible Bench for Inspection of Shaft

marposs — Tue, 26 May 2009 14:43:24 +0000

The Optoquick Set measuring system has been conceived for working directly on the shop floor, without the need to locate in a laboratory environment.
The spectrum of the checks the Optoquick Set can do is wide open. Among them:

Journal Diameters and related roundness and taper
Lengths and widths
Complete undercut inspections (Diameter, Radius, Width)
Run-out to a mechanical axis
Angles, chamfers, fillets

To know more follow the link: Optoquick Set – Optoelectronic Flexible Bench for Inspection of Shaft

M63 Measuring System

marposs — Tue, 20 May 2008 15:35:42 +0000

Manual gauging station for inspection of ring-like components (bushings)

The M63 bench is an innovative measuring system with the following strengths: simple and efficient in design, compact and robust.

The bench gauge is dedicated to the final or interoperational inspection of a single bushing type part (vertical axis, radial symmetry and weighing less than 15 Kg/33 lb).

The part is manually loaded and referred on a nosepiece or a descending pivoting arm.

The most recent Marposs measuring transmissions belonging to the AMA line are utilized in the gauge design (made with non-magnetic stainless steel) and with Red Crown pencil probes. These measuring components are mounted to a counterplate fixed to the part support plate by three columns.

This mechanical solution completely isolates the measuring structure from the weight of the part, assuring the highest metrological performances.

If required by the application, the measuring transmissions can be provided with pneumatic retraction. The actuation of the rear measuring group can be manual or pneumatic.

The new M63 bench replaces the Marposs Universal Quick Set bench when no retooling is needed and is provided with guarding for the rear measuring group.

The gauge system can be provided with either static or dynamic capabilities for dimensional and geometric inspection of I.D.’s and/or O.D.’s.

Vertical Station for Manual Inspection of Shafts – M67

marposs — Mon, 05 May 2008 18:08:58 +0000

The M67 bench is an innovative measuring system with the following strengths: simplicity and efficient in design, compact and robust.

Its bracketry and guarding are manufactured using Laser Cutting technology which can be easily integrated with CAD systems. This reduces both preparation times and costs for manufacturing of individual details.

The bench is dedicated to the final or interoperational inspection of a single part type weighing less than 6 Kg.

The measuring components are realized with the most recent Marposs measuring transmissions belonging to the AMA line (made in non-magnetic stainless steel) and with Red Crown pencil probes.

The workpiece is manually loaded in the vertical position and referred between centers that are either fixed or motorized.

To know more log on to the: Vertical Station for Manual Inspection of Shafts – M67

Vertical Bench for Shaft Inspection M57V

marposs — Thu, 20 Mar 2008 07:49:34 +0000

The M57V bench is an innovative measuring system which offers simplicity through the efficiency of its design, as well as being compact and robust.

The vertical solution provides a much smaller foot print which takes up a limited amount of surface space as compared to the horizontal solution. In addition, vertical loading of the part eliminates part and structural deformation, as well as any bending in the reference centers and helps part dragging in dynamic applications.

The bench, engineered for crankshafts weighing more than 6 Kg, can also check camshafts, gear shafts, rotors and axle shafts.

The measuring components are comprised of the Marposs measuring transmission devices belonging to the AMA line (made of non-magnetic stainless steel) and Red Crown pencil probes. Other cell types can be used in special applications. The bench gauge is dedicated to the inter-operational inspection of a single part type after end face milling, turning, pin bearing milling and grinding. The work piece is loaded manually or by a manual gantry between centers in the vertical position. The centers are either fixed (static measurement) or motorized (dynamic measurement) and the measuring stations are brought onto the part by manual pivoting arms.

To know more follow the link: Vertical Bench for Shaft Inspection M57V

M39s – Scanning System

marposs — Sun, 18 Nov 2007 15:17:08 +0000

M39s (Scanning System)

Measuring System for the Profile Check of Inside and Outside Diameters

Scanning technology is an essential tool for functional control of components produced under high accuracy matching and assembly conditions.
This system not only inspects and graphically displays the dimensional profile of the matching surfaces along their global extension, but also provides indications for the process control of the machine.
By using different measuring elements, the diameter of a bore or an outside diameter can be inspected, along its total length.
The measured values contain detailed information about the diameter and the cylindrical form, which determine the matching conditions or classification.
The use of standard components and a robust mechanical design guarantee excellent performances for years in the shop floor environment.

To know more follow the link: Measuring System for the Profile Check of Inside and Outside Diameters

No related posts.