These are simple or sophisticated measuring stations, dedicated or flexible, manual or automatic, self-standing or completely integrated in the active (conveyors and/or robots) or passive (rolling) part transfer system.

To know more: Marposs post-process measuring systems applied on Grinders

Related posts:

1. Automatic Measuring Machine M110 Optoflex
2. Electronic Measuring Plug – M10

The M63 bench is an innovative measuring system with the following strengths: simple and efficient in design, compact and robust.

The bench gauge is dedicated to the final or interoperational inspection of a single bushing type part (vertical axis, radial symmetry and weighing less than 15 Kg/33 lb).

The part is manually loaded and referred on a nosepiece or a descending pivoting arm.

The most recent Marposs measuring transmissions belonging to the AMA line are utilized in the gauge design (made with non-magnetic stainless steel) and with Red Crown pencil probes. These measuring components are mounted to a counterplate fixed to the part support plate by three columns.

This mechanical solution completely isolates the measuring structure from the weight of the part, assuring the highest metrological performances.

If required by the application, the measuring transmissions can be provided with pneumatic retraction. The actuation of the rear measuring group can be manual or pneumatic.

The new M63 bench replaces the Marposs Universal Quick Set bench when no retooling is needed and is provided with guarding for the rear measuring group.

The gauge system can be provided with either static or dynamic capabilities for dimensional and geometric inspection of I.D.’s and/or O.D.’s.

Related posts:

1. Vertical Bench for Shaft Inspection M57V
2. Vertical Station for Manual Inspection of Shafts – M67
3. Leak Testing

The vertical solution provides a much smaller foot print which takes up a limited amount of surface space as compared to the horizontal solution. In addition, vertical loading of the part eliminates part and structural deformation, as well as any bending in the reference centers and helps part dragging in dynamic applications.

The bench, engineered for crankshafts weighing more than 6 Kg, can also check camshafts, gear shafts, rotors and axle shafts.

The measuring components are comprised of the Marposs measuring transmission devices belonging to the AMA line (made of non-magnetic stainless steel) and Red Crown pencil probes. Other cell types can be used in special applications. The bench gauge is dedicated to the inter-operational inspection of a single part type after end face milling, turning, pin bearing milling and grinding. The work piece is loaded manually or by a manual gantry between centers in the vertical position. The centers are either fixed (static measurement) or motorized (dynamic measurement) and the measuring stations are brought onto the part by manual pivoting arms.

To know more follow the link: Vertical Bench for Shaft Inspection M57V

Related posts:

1. Vertical Station for Manual Inspection of Shafts – M67
2. M63 Measuring System
3. Optoquick Set – Optoelectronic Flexible Bench for Inspection of Shaft

Due to a combination of multiprocessor electronics provided with dedicated algorithms, repeatability and accuracy are guaranteed comparable to those obtained in Metrological Laboratory.

Capable of maintaining reduced cycle times and quality control of an entire production run.

To know more follow the link: Measuring Station for CAM Profile Inspection – M57 Profile

Related posts:

1. Automatic Measuring Machine M110 Profile
2. Automatic Measuring Machine M125
3. Automatic Measuring Machine M128

Versatile

Thanks to its rugged design, the M110 Optoflex is perfect for measurement expecially for measuring parts in the shop floor environment. It can be integrated into a production line for inter-operational or final inspection of parts and can be used as an audit station or for post-process inspection after the machine tool.

Flexible

A characteristic of the M110 Optoflex is the very high level of flexibility. The use of shadow cast optoelectronic technology allows for the inspection of a great variety of shafts while performing many different types of measurement, without the necessity of retooling and without part contact.

Reliable

The M110 Optoflex is designed and built using the most advanced engineering methods, making it an extremely reliable and accurate instrument for measurement.

Follow the link to know more: Automatic Measuring Machine for Optoelectronic Inspection of Shafts

Related posts:

1. Automatic Measuring Machine – M110
2. Automatic Measuring Machine M110 Profile
3. Automatic Measuring Machine M128

Designed to check one internal diameter in a range from 13 to 140 mm
Utilized for inter-operational gauging on transfer machines, special purpose machines and post-process gauging stations
Typical Measurements include Cylinder Block and Connecting Rod Bores
The plug guarantees reliability and process productivity improvements by automation of the process itself including part measurement and closed loop feedback to the machine tool (compensation of tool wear, improvement of overall machining time and scrap reduction).
The standard plug includes three bodies to cover the measuring ranges 13-21 mm, 21-45 mm and 45-140 mm and uses tungsten carbide or diamond contacts depending on the material of the part being inspected.
The plug nosepiece can be provided with or without a self-centering function, while the measurement is always performed using Marposs LVDT transducer technology. Floating or rigid recoil devices can be provided to protect the plug body from potential damaging collisions that could result from a mis-positioned part or part overstock conditions. The plug can be fitted with air blow offs for part cleaning before inspection.
The E9066N is utilized for measurement acquisition in complex applications or an application for which statistical analysis is required and the E3 family of electronics is used in simple applications.?Ǭ†

To know more about the Electronic Measuring Plug – M10

Related posts:

1. M19 Gauge Plug for Transfer Lines
2. Marposs post-process measuring systems applied on Grinders
3. Automatic Measuring Machine M110 Optoflex

For more than 25 years, Marposs has dedicated to its customers a combination of advanced products, technical know-how and commitment to the design, installation and support anywhere in the world, of the automatic assembly lines for automotive transmissions.
The typical measurement needs are: shims determination for components positioning, pre-load on differential housing and gearboxes, meshing stations, back-lash verification and a variety of dimensional and functional inspection on the single elements of the powertrain.

To know more follow the link: Applications for Assembly of Automotive Transmissions

Related posts:

1. Applications for Assembly of Automotive Transmission

The typical measurement needs are: shims determination for components positioning, pre-load on differential housing and gearboxes, meshing stations, back-lash verification and a variety of dimensional and functional inspection on the single elements of the powertrain.

To get more information follow the link: Applications for Assembly of Automotive Transmission

Related posts:

1. Gauging for Assembly
2. M62 Automotive Transmission Line
3. MARPOSS precision measuring instruments for inspection of gears

To know more about the E9066T™ – Industrial thin Panel PC

Related posts:

1. Industrial Panel PC
2. Modular Data Acquisition System – GAGE BOX™
3. Marposs Mechanical Bore Gage