The M110 machine is an automated inspection system, developed to measure all dimensional and geometric parameters for shaft-like part configurations.
It is based on a modular construction and designed using the most advanced engineering criteria. The result is a reliable and accurate inspection instrument.

This gauging machine does not need to be housed in a controlled environment, thanks to it robustness. It operates in a normal production area and is suitable either for inter-operational and/or final inspections.

Besides gauging, functions like non destructive (ND) testing, marking and parts segregation may be easily integrated to the basic machine.

The M110 machine includes all the systems necessary to load, locate and rotate the parts to be inspected; no manual operations are required. This allows a completely automatic measuring cycle, including part load and unload.

The capability of high speed performance along with the application in shop floor conditions, make it possible to check all the conventional parameters on 100% of the manufactured parts, guaranteeing and certifying the overall quality of the production.

This equipment is used along with the E9066N FLAT PANEL and/or the E70s electronic unit. Follow the link to know more: Automatic Measuring Machine for Inspection of Shafts

M100 is an automated inspection system for brake disks, brake drums and hubs.
The system can satisfy all the typical dimensional and geometric gauging requirements. Besides gauging, functions like non destructive (ND) testing, marking and parts segregation may be easily integrated to the basic machine.

Ease of maintenance and high gauging performances are obtained thanks to the most appropriate design and manufacturing technologies. This industrialization is also intended to minimize line down time in case of intervention.

The M100 is a gauging system based on a standard modular architecture; it can be easily tailored to solve any typical application on brake disks, drums and hubs. The system has been conceived for on-line automatic inspection, where dimensional and geometrical checks are performed dynamically at various machining stages, either inter-operational or final inspection.

Special dedicated solutions also allow different part types to be checked with or without retooling, follow the link:
Automatic Measuring Machine for Inspection of Disk-Like Components