Aerospace industries and their subcontractors can find at Marposs a full range of measuring / testing equipment (non destructive testing too) to help with manufacturing and assembling their products:

- In-process gauge heads, touch probes and sensors for machine tools;
- Hand held gauges for various checks;
- Standard gauging components
- Leak testing equipment
- Special, tailor-made gauge fixtures and stations with various levels of automation

No related posts.

Marposs presents “The Bore Gauge Line of Products”

Bore Gauges are able to measure inside diameters, ovality and taper with high precision.
M1 AIR – Manual Air Bore Gauge
M1 C – Electronic manual bore gauge with half-bridge (HBT) transducer
M1 – Electronic manual bore gauge with full-bridge (LVDT) transducer
M1 STAR™ – Dedicated Solutions – Special Manual Bore Gauges
M1 STAR™ EBG – Manual Electronic Bore Gauge with LVDT or HBT Transducers
M1 STAR™ MBG – Manual Mechanical Bore Gauge with Mechanical or Electronic Dial Indicators or Pencil Probe
M1 WAVE – Manual Wireless Bore Gauge with BLUETOOTH Technology
OEM Products – The OEM section, presents the TESTAR products

Related posts:

1. Advanced Line of Measuring Plugs
2. Marposs Mechanical Bore Gage
3. M19 Gauge Plug for Transfer Lines

The highly advanced line of measuring plugs for inspecting bore diameters:  M1 Star™

* The mechanical transmission measuring system can be interfaced with any pencil probe, dial or digital indicator.

* Application range is 3 to 300 mm (0.12 to 11.81″). With an extensive range of accessories, the M1 Star™ MBG can be configured to measure at depths of more than 500 mm and measure bores that are perpendicular to the axis of insertion.

* The wide range of modular components makes it possible to configure the bore gauge to meet all measuring needs.

* The bore gauge can be totally retooled or reconditioned by simply replacing the nosepiece and contacts. A mechanical positioning system automatically ensures alignment between the nosepiece and contacts.

* Due to the mechanical transmission system having an extensive range of accuracy, only one master is needed for zero setting.

* The Mechanical Bore Gauge is accurate, robust and reliable. Only periodic cleaning of the mechanical measurement-transmission area is necessary.

To know more about the M1 Star™ line of measuring plugs

Related posts:

1. The Bore Gauge Line of Products
2. Marposs Mechanical Bore Gage
3. LVDT and HBT Analog Pencil Probe Line – Red Crown

These are simple or sophisticated measuring stations, dedicated or flexible, manual or automatic, self-standing or completely integrated in the active (conveyors and/or robots) or passive (rolling) part transfer system.

To know more: Marposs post-process measuring systems applied on Grinders

Related posts:

1. Automatic Measuring Machine M110 Optoflex
2. Electronic Measuring Plug – M10

Follow the link if you need more information about the Multidimensional Modular System Retoolable for Shaft-Like Parts Measured Either With Vertical Or Horizontal Axis.

Related posts:

1. Vertical Bench for Shaft Inspection M57V
2. Optoquick Set – Optoelectronic Flexible Bench for Inspection of Shaft
3. Modular Data Acquisition System – GAGE BOX™

The Red Crown pencil probes line fulfils quality control requirements in the workshop.

Reliability and durability are assured in all models through innovative design and the use of the most suitable materials, developed thanks to TESTAR’s extensive experience in the quality control sector.

Red Crown pencil probes assure precision measurements, even below one micron, and contribute to the quality of measurement data.

Red Crown product line offers:

• Comprehensive product range
• High quality and precision
• Competitive prices
• Short delivery
• Durability

Related posts:

1. Vertical Station for Manual Inspection of Shafts – M67
2. Vertical Bench for Shaft Inspection M57V
3. M63 Measuring System

• Journal Diameters and related roundness and taper
• Lengths and widths
• Complete undercut inspections (Diameter, Radius, Width)
• Run-out to a mechanical axis
• Angles, chamfers, fillets

To know more follow the link: Optoquick Set – Optoelectronic Flexible Bench for Inspection of Shaft

Related posts:

1. Vertical Bench for Shaft Inspection M57V
2. Multidimensional Modular System Retoolable for Shaft-Like Parts Measured Either With Vertical Or Horizontal Axis.
3. Automatic Measuring Machine M110 Optoflex

This line of manual systems and machines for functional gear verification includes a wide range of highly precise solutions, to measure all the dimensional and functional parameters of pinions, spur gears, helical gears, shaft gears and internal ring gears.

To know more, follow the link: MARPOSS precision measuring instruments for inspection of gears

Related posts:

1. M62 Automotive Transmission Line
2. MARPOSS manual snap gauge, a precision measuring instrument with inductive transducers

The mechanical zerosetting is not requiring the assembly of the measuring instrument. No maintenance is needed, thanks to its long life carbide reference prisms and contacts. Available with two different types of handle, anatomic and slim.

Follow the link: MARPOSS manual snap gauge, a precision measuring instrument with inductive transducers

Related posts:

1. MARPOSS precision measuring instruments for inspection of gears
2. The Bore Gauge Line of Products
3. Marposs Mechanical Bore Gage

Mechanical Bore Gauge is the ideal manual instrument for precision measuring of inside diameter, ovality or taper.
This equipment is used along with TD dial indicators or Quick Digit digital indicators or Quick Read or E4N or E9066 electronic units.

To know more about the Marposs Mechanical Bore Gage

Related posts:

1. The Bore Gauge Line of Products
2. Advanced Line of Measuring Plugs
3. Modular Data Acquisition System – GAGE BOX™

In this page you’ll find examples of parts with and without threadand a series of tools.

Follow the link Thread Inspection by Eddy Current

Related posts:

1. Universal Electronic Instrument for the Non Destructive Inspection of the Material Property and Material Integrity
2. Multichannel Electronic for Non Destructive Test by Eddy Current Probes

The manufacturing process of cylinder bores of automobile engines can often cause the formation of porosity (resulting from fusion in aluminium or cast iron cylinder bores) or cracks in steel cylinder liners. The need of both a Non-Destructive inspection to detect superficial defects as well as the typical dimensional controls has driven the integration of Eddy Current and pneumatic technology in a single plug.

Related posts:

1. Automatic non Destructive Testing Equipment for Surface Defects
2. Multichannel Electronic for Non Destructive Test by Eddy Current Probes
3. N. D. Test on Centerless Grinder

The ever-increasing demand for global quality control of the entire production requires technical solutions that can guarantee the best performances at a reasonable cost.

Check for yourself: N. D. Test on Centerless Grinder.

Related posts:

1. Automatic Equipment for non Destructive Test of Surface Defects and Dimensional Check
2. Multichannel Electronic for Non Destructive Test by Eddy Current Probes

The equipment has been designed with the aim to solve the problem of the 100% piston pins inspection as close as possible to the production line without need of particular workpiece handling in order to keep space and cost as low as possible.

The particular shape of the equipment permits very easy installation on existing lines.

To know more follow the link: Automatic non destructive Testing Equipment for surface defects

Related posts:

1. Automatic Equipment for non Destructive Test of Surface Defects and Dimensional Check
2. Conventional Rockwel Hardness Testing Equipment for Shafts Like Parts
3. Multichannel Electronic for Non Destructive Test by Eddy Current Probes

Applications

The ergonomic and compact design makes the fork suitable for different solutions such as manually loaded benches or fully automatic machine for the inspection of 100% of production.

and more…

To know more log on to the Hardness Testing page.

Related posts:

1. Automatic non Destructive Testing Equipment for Surface Defects
2. Vertical Station for Manual Inspection of Shafts – M67
3. Automatic Measuring Machine – M110

A) Problem Description

Camshafts for automobile engines are manufactured using a variety of methods.They can cause a variety of quality defects, such as:

* porosity

* hardness cracks

* casting shrinkage, cavities and holes

* missing material

Subsequent grinding can also cause cracks or grinding burns (soft spots). They are caused by variations during grinding operations such as changes in grinding speed, changes in grinding wheel/workpiece position and by the effects of the coolant used.

In the past, attempts to automate test procedures have often failed.

B) Solution

Complex geometry’s such as camlobes can now be easily tested with standard Marposs N.D. probes. The Marposs N.D. inspection method is based on the Eddy Current technology. It is the only method capable of performing N.D. inspections automatically. For this reason, it can be easily installed into a production line for 100% inspection.

The traditional testing procedure, which is usually performed with magnetic powder and/or human evaluation, can be now reduced in terms of inspection time and overall cost.

Cracks as small as 100 microns in depth can be detected, dependent upon the surface finishing and material homogeneity

To know more about the Manual Gauging Station for Multidimensional Inspection of Conrods

Related posts:

1. Manual Gauging Station M31

The M63 bench is an innovative measuring system with the following strengths: simple and efficient in design, compact and robust.

The bench gauge is dedicated to the final or interoperational inspection of a single bushing type part (vertical axis, radial symmetry and weighing less than 15 Kg/33 lb).

The part is manually loaded and referred on a nosepiece or a descending pivoting arm.

The most recent Marposs measuring transmissions belonging to the AMA line are utilized in the gauge design (made with non-magnetic stainless steel) and with Red Crown pencil probes. These measuring components are mounted to a counterplate fixed to the part support plate by three columns.

This mechanical solution completely isolates the measuring structure from the weight of the part, assuring the highest metrological performances.

If required by the application, the measuring transmissions can be provided with pneumatic retraction. The actuation of the rear measuring group can be manual or pneumatic.

The new M63 bench replaces the Marposs Universal Quick Set bench when no retooling is needed and is provided with guarding for the rear measuring group.

The gauge system can be provided with either static or dynamic capabilities for dimensional and geometric inspection of I.D.’s and/or O.D.’s.

Related posts:

1. Vertical Bench for Shaft Inspection M57V
2. Vertical Station for Manual Inspection of Shafts – M67
3. Leak Testing

Its bracketry and guarding are manufactured using Laser Cutting technology which can be easily integrated with CAD systems. This reduces both preparation times and costs for manufacturing of individual details.

The bench is dedicated to the final or interoperational inspection of a single part type weighing less than 6 Kg.

The measuring components are realized with the most recent Marposs measuring transmissions belonging to the AMA line (made in non-magnetic stainless steel) and with Red Crown pencil probes.

The workpiece is manually loaded in the vertical position and referred between centers that are either fixed or motorized.

To know more log on to the: Vertical Station for Manual Inspection of Shafts – M67

Related posts:

1. Vertical Bench for Shaft Inspection M57V
2. M63 Measuring System
3. LVDT and HBT Analog Pencil Probe Line – Red Crown

The line of manual systems and machines for functional gear verification includes a wide range of highly precise solutions, to measure all the dimensional and functional parameters of pinions, spur gears, helical gears, shaft gears and internal ring gears. All of these measurement products, are developed by using the most advanced engineering methods, making the most reliable and precise inspection instruments for the workshop environment. As with all Marposs systems, the M62 family of measurement solutions can be interfaced with the entire selection of Marposs electronic measurement display units, like the compact Quick Read (multi color mini column), the E4N microprocessor column and the powerful E9066 industrial computer provided with a sophisticated graphic display algorithm for gear analysis as well as comprehensive statistical calculations.

To know more log on to the M62 Automotive Transmission Line

Related posts:

1. MARPOSS precision measuring instruments for inspection of gears
2. Applications for Assembly of Automotive Transmission

The vertical solution provides a much smaller foot print which takes up a limited amount of surface space as compared to the horizontal solution. In addition, vertical loading of the part eliminates part and structural deformation, as well as any bending in the reference centers and helps part dragging in dynamic applications.

The bench, engineered for crankshafts weighing more than 6 Kg, can also check camshafts, gear shafts, rotors and axle shafts.

The measuring components are comprised of the Marposs measuring transmission devices belonging to the AMA line (made of non-magnetic stainless steel) and Red Crown pencil probes. Other cell types can be used in special applications. The bench gauge is dedicated to the inter-operational inspection of a single part type after end face milling, turning, pin bearing milling and grinding. The work piece is loaded manually or by a manual gantry between centers in the vertical position. The centers are either fixed (static measurement) or motorized (dynamic measurement) and the measuring stations are brought onto the part by manual pivoting arms.

To know more follow the link: Vertical Bench for Shaft Inspection M57V

Related posts:

1. Vertical Station for Manual Inspection of Shafts – M67
2. M63 Measuring System
3. Optoquick Set – Optoelectronic Flexible Bench for Inspection of Shaft

Due to a combination of multiprocessor electronics provided with dedicated algorithms, repeatability and accuracy are guaranteed comparable to those obtained in Metrological Laboratory.

Capable of maintaining reduced cycle times and quality control of an entire production run.

To know more follow the link: Measuring Station for CAM Profile Inspection – M57 Profile

Related posts:

1. Automatic Measuring Machine M110 Profile
2. Automatic Measuring Machine M125
3. Automatic Measuring Machine M128

Marposs integrates the group of bench gauges with the new M50 system. Perfect for the inter-operational and final inspections, the M50 is able to perform all the dimensional, geometric and non-destructive measures typical for brake disks…

To know more follow the link: Manual Gauging Station for Multidimensional Inspection of Disk-Like Components

Related posts:

1. Automatic Measuring Machine – M100
2. Manual Gauging Station M31
3. M38 – Manual Gauging Station

Measuring System for the Profile Check of Inside and Outside Diameters

Scanning technology is an essential tool for functional control of components produced under high accuracy matching and assembly conditions.
This system not only inspects and graphically displays the dimensional profile of the matching surfaces along their global extension, but also provides indications for the process control of the machine.
By using different measuring elements, the diameter of a bore or an outside diameter can be inspected, along its total length.
The measured values contain detailed information about the diameter and the cylindrical form, which determine the matching conditions or classification.
The use of standard components and a robust mechanical design guarantee excellent performances for years in the shop floor environment.

To know more follow the link: Measuring System for the Profile Check of Inside and Outside Diameters

No related posts.

M38 is a complete line of gauges suitable for the dimensional and shape checks of the Constant Velocity Joints (bell, core, cage) during the inter-operational and/or final stages of the machining process.

The gauges are equipped with the following components:

• Modular base for measuring station and retraction unit
• Standard self-centering measuring cells for C.V.J. applications with double or triple transducer
• Mechanical device for part reference (nosepiece and anti-rotation element)
• Protection guards
• Manual lever for retraction units

To know more log on to: Manual Gauging Station for Multidimensional Inspection of Constant Velocity Joints

Related posts:

1. Manual Gauging Station M50
2. Manual Gauging Station M31
3. Vertical Station for Manual Inspection of Shafts – M67

It is a final or inter-operational inspection bench gauge developed to accurately check all the final typical characteristics of the connecting rods.

It can be tailored to inspect a single part type or configured to be easily retooled for different part types. The dimensional and geometric checks that can be performed are:

• Pin and crank bore internal diameters
• Thickness
• Ovality
• Taper
• Center distance
• Squareness of bores to faces
• Twist
• Bend

To know more log on to: Manual Gauging Station for Multidimensional Inspection of Conrods

Related posts:

1. M38 – Manual Gauging Station
2. Manual Gauging Station M50
3. ND Camshaft Inspection

Inspection of rotating parts loaded with horizontal axis (e.g. families of shafts)

Use in demanding shop-floor environments immediately after a machining operation thanks to its low sensitivity to dirt and to part surface roughness

The two bi-directional measuring heads provide gauging flexibility at operating rates significantly faster than possible with other devices available in the market today.

Reliable and accurate, it can statically or dynamically perform many types of dimensional and geometric checks, including:

• Diameters Distances Concentricity Ovality Barrel shape Taper Straightness Parallelism Radial runout
• Axial runout

Marposs Quick SPC‚Ñ¢ software allows for an on-line variable data analysis. The use of the Flex Add-On software lets the operator easily program a new part type. Its feedback capabilities make the M2016 an integral part of the production system.

To know more log on to: M2016 Flexible Contact Measurement System

Related posts:

1. Optoquick Set – Optoelectronic Flexible Bench for Inspection of Shaft
2. E9066T™ – Industrial thin Panel PC

designed to perform two internal diameter measurements in the same section of the bore at 90¬? to each other utilized after turning and grinding operations on transfer machines, special purpose machines and post-process gauging stations

typical for the check of connecting rods, cylinder bores and when measurement for ovality is required

The plug guarantees reliability and increased productivity of the process by automation of the process itself inclusive of the part measurement and closed loop feedback to the machine tool (compensation of tool wear, improvement of overall machining time and scrap reduction).
Measurements are performed by use of four Marposs measuring cells, each provided with one LVDT transducer.
The plug uses a body with fixed nosepiece. In order to protect it from potential collision due to part mis-positioning or part overstock conditions, the plug requires mounting to rigid recoiling devices.
In the diameter range from 22 to 80 mm the gauge plug is provided with cleaning air nozzles in the measuring section while in the diameter range from 16 to 22 mm the cleaning air flow is offset and located in proximity of the gauge fingers (the air inlet is always at 180¬? with respect to the junction box).
It can be connected to E9066N electronic unit for complex applications or applications for which statistical analysis is required and to E3 family electronic units for simple applications.
Side-by-side assembled on the machine, the gauge plugs can measure bores having minimum center distance of 71 mm.

To know more log on to: M19 Gauge Plug for Transfer Lines

Related posts:

1. Electronic Measuring Plug – M10
2. The Bore Gauge Line of Products
3. Leak Testing

Reliable
In the field of measurement the M128 system is designed and manufactured with the help of the most advanced engineering methods, making it an extremely reliable and precise checking instrument in workshop environment.

Complete
The M128 is provided with all the systems necessary for the integration within a manufacturing line. The capacity to keep cycle times within 7 seconds, assures the check of 100% of parts, allowing quality check of the whole production.

Versatile
The M128 system due to a series of stations and accessories, satisfies all the requests related to measure, con-rod identification and selection.

Competitive
The possibility to customize the M128 system M128 according to production and measurement requirements, allows for determining the proper gauging solution for cost-effective connecting rod testing.

To know more about this kind of measurement and the Automatic Measuring Machine M128, follow the link:
Automatic Measuring Machine M128 for Inspection of Conrods

Related posts:

1. Automatic Measuring Machine M125
2. Automatic Measuring Machine M110 Optoflex
3. Automatic Measuring Machine M110 Profile

Versatile
The M125 system, thanks to its strength, was born to measure in workshop environment. It is able to offer, together with dimensional, geometric and Non-Destructive (ND) checks, additional functions such as marking, part selection and back-up area.

Reliable
The M125 system is designed and manufactured with the help of the most advanced engineering methods, making it an extremely reliable and precise checking instrument in the workshop environment.

Complete
The M125 is provided with all the systems necessary to meter and transfer parts coming from the manufacturing line automation. The capacity to provide for reduced cycle times, assures the check of 100% of parts, allowing the quality check of the whole production.

To know more about the Automatic Measuring Machine M125: Automatic Measuring Machine for Inspection of Cylinder Block and Head

Related posts:

1. Automatic Measuring Machine M128
2. Automatic Measuring Machine M110 Profile
3. Automatic Measuring Machine M110 Optoflex

Reliable, Precise, Fast
Rugged enough to be used in a workshop environment.
Can be integrated into production lines for inter-operational and final inspection. Reliable and accurate, designed and built using the most advanced engineering methods.
Due to a combination of multiprocessor electronics provided with dedicated algorithms, repeatability and accuracy are guaranteed comparable to those obtained in Metrological Laboratory.
Capable of maintaining reduced cycle times and quality control of an entire production run.
Optional functions include part marking and part segregation.

To know more: Automatic Measuring Machine M110 Profile

Related posts:

1. Measuring Station for CAM Profile Inspection – M57 Profile
2. Automatic Measuring Machine M125
3. Automatic Measuring Machine M110 Optoflex

Versatile

Thanks to its rugged design, the M110 Optoflex is perfect for measurement expecially for measuring parts in the shop floor environment. It can be integrated into a production line for inter-operational or final inspection of parts and can be used as an audit station or for post-process inspection after the machine tool.

Flexible

A characteristic of the M110 Optoflex is the very high level of flexibility. The use of shadow cast optoelectronic technology allows for the inspection of a great variety of shafts while performing many different types of measurement, without the necessity of retooling and without part contact.

Reliable

The M110 Optoflex is designed and built using the most advanced engineering methods, making it an extremely reliable and accurate instrument for measurement.

Follow the link to know more: Automatic Measuring Machine for Optoelectronic Inspection of Shafts

Related posts:

1. Automatic Measuring Machine – M110
2. Automatic Measuring Machine M110 Profile
3. Automatic Measuring Machine M128

The M110 machine is an automated inspection system, developed to measure all dimensional and geometric parameters for shaft-like part configurations.
It is based on a modular construction and designed using the most advanced engineering criteria. The result is a reliable and accurate inspection instrument.

This gauging machine does not need to be housed in a controlled environment, thanks to it robustness. It operates in a normal production area and is suitable either for inter-operational and/or final inspections.

Besides gauging, functions like non destructive (ND) testing, marking and parts segregation may be easily integrated to the basic machine.

The M110 machine includes all the systems necessary to load, locate and rotate the parts to be inspected; no manual operations are required. This allows a completely automatic measuring cycle, including part load and unload.

The capability of high speed performance along with the application in shop floor conditions, make it possible to check all the conventional parameters on 100% of the manufactured parts, guaranteeing and certifying the overall quality of the production.

This equipment is used along with the E9066N FLAT PANEL and/or the E70s electronic unit. Follow the link to know more: Automatic Measuring Machine for Inspection of Shafts

Related posts:

1. Automatic Measuring Machine M110 Optoflex
2. Automatic Measuring Machine – M100
3. Automatic Measuring Machine M110 Profile

M100 is an automated inspection system for brake disks, brake drums and hubs.
The system can satisfy all the typical dimensional and geometric gauging requirements. Besides gauging, functions like non destructive (ND) testing, marking and parts segregation may be easily integrated to the basic machine.

Ease of maintenance and high gauging performances are obtained thanks to the most appropriate design and manufacturing technologies. This industrialization is also intended to minimize line down time in case of intervention.

The M100 is a gauging system based on a standard modular architecture; it can be easily tailored to solve any typical application on brake disks, drums and hubs. The system has been conceived for on-line automatic inspection, where dimensional and geometrical checks are performed dynamically at various machining stages, either inter-operational or final inspection.

Special dedicated solutions also allow different part types to be checked with or without retooling, follow the link:
Automatic Measuring Machine for Inspection of Disk-Like Components

Related posts:

1. Manual Gauging Station M50
2. Automatic Measuring Machine – M110
3. Automatic Measuring Machine M125

Designed to check one internal diameter in a range from 13 to 140 mm
Utilized for inter-operational gauging on transfer machines, special purpose machines and post-process gauging stations
Typical Measurements include Cylinder Block and Connecting Rod Bores
The plug guarantees reliability and process productivity improvements by automation of the process itself including part measurement and closed loop feedback to the machine tool (compensation of tool wear, improvement of overall machining time and scrap reduction).
The standard plug includes three bodies to cover the measuring ranges 13-21 mm, 21-45 mm and 45-140 mm and uses tungsten carbide or diamond contacts depending on the material of the part being inspected.
The plug nosepiece can be provided with or without a self-centering function, while the measurement is always performed using Marposs LVDT transducer technology. Floating or rigid recoil devices can be provided to protect the plug body from potential damaging collisions that could result from a mis-positioned part or part overstock conditions. The plug can be fitted with air blow offs for part cleaning before inspection.
The E9066N is utilized for measurement acquisition in complex applications or an application for which statistical analysis is required and the E3 family of electronics is used in simple applications.?Ǭ†

To know more about the Electronic Measuring Plug – M10

Related posts:

1. M19 Gauge Plug for Transfer Lines
2. Automatic Measuring Machine M110 Optoflex
3. Marposs post-process measuring systems applied on Grinders

Leak testing is now generally used as one of the methods for quality and process control.

It is used in the machining or assembling process of a product, in order to detect not only the presence of pores or cracks in a cast piece, but also the absence of machining, the incorrect assembly of a component, a defective gasket or the imperfect machining of two mating surfaces.

Marposs offers itself as a partner in the formulation and realization of dedicated leak testing systems.

Log on to the Systems to Detect Oil and Water Circuit Leakage in Engine and Transmission Parts to know more.

Related posts:

1. Leak Testing

Pneumatic Technology
The manual plug is provided with an annular slit jet to check the valve seat combination errors of roundness and seat angle. The E4N column display gives measure of air leakage between the conical reference of the plug and the valve seat. Exceeding upper leakage limit (approximately 400 cm3 / min) indicates shape error.

Complete
The leakage plug, is interfaced with the microprocessor E4N AIR column. “Zero leakage” “Maximum leakage” masters are always supplied with the manual gauge. The proposed solution permits a 100% check of all parts, allowing quality control of the entire production.

Follow the link Manual Pneumatic Gauge to Check the Valve Seats on Engine Heads to know more.

Related posts:

1. Leak Testing

For more than 25 years, Marposs has dedicated to its customers a combination of advanced products, technical know-how and commitment to the design, installation and support anywhere in the world, of the automatic assembly lines for automotive transmissions.
The typical measurement needs are: shims determination for components positioning, pre-load on differential housing and gearboxes, meshing stations, back-lash verification and a variety of dimensional and functional inspection on the single elements of the powertrain.

To know more follow the link: Applications for Assembly of Automotive Transmissions

Related posts:

1. Applications for Assembly of Automotive Transmission

The typical measurement needs are: shims determination for components positioning, pre-load on differential housing and gearboxes, meshing stations, back-lash verification and a variety of dimensional and functional inspection on the single elements of the powertrain.

To get more information follow the link: Applications for Assembly of Automotive Transmission

Related posts:

1. Gauging for Assembly
2. M62 Automotive Transmission Line
3. MARPOSS precision measuring instruments for inspection of gears

The system is composed of dedicated, stackable modules to manage analog sensors and digital Input/Output signals.

All modules are daisy-chained together and exchange measurement data, programming data and I/O signals with the E9066T™ Industrial PC through an USB or a simple RS232 serial link. Any commercial PC can also be used.

The system allows direct interfacing and data collection from TESTAR probes or measuring cells, and from a wide variety of third party sensors.

To Know more follow the link: Modular Data Acquisition System – GAGE BOX™

Related posts:

1. E9066T™ – Industrial thin Panel PC
2. Marposs Mechanical Bore Gage

Log on to the complete information about the GO/NO GO, CALIPERS AND MASTERS

No related posts.

This system analyzes the commutator contour and calculates geometrical characteristics, after a “filtering” process removes the slots from the original profile.

To get more information about the Electric Motor Armature Inspection

No related posts.

To know more about the E9066T™ – Industrial thin Panel PC

Related posts:

1. Industrial Panel PC
2. Modular Data Acquisition System – GAGE BOX™
3. Marposs Mechanical Bore Gage

To know more about the E9066s™ Industrial Panel PC

Related posts:

1. E9066T™ – Industrial thin Panel PC

To know more about the:

Multichannel Electronic for Non Destructive Test by Eddy Current Probes

Related posts:

1. Universal Electronic Instrument for the Non Destructive Inspection of the Material Property and Material Integrity
2. Automatic Equipment for non Destructive Test of Surface Defects and Dimensional Check
3. N. D. THREAD INSPECTION

Do you need more information? Log on to:
Universal Electronic Instrument for the Non Destructive Inspection of the Material Property and Material Integrity page

Related posts:

1. Multichannel Electronic for Non Destructive Test by Eddy Current Probes
2. N. D. THREAD INSPECTION
3. Automatic Equipment for non Destructive Test of Surface Defects and Dimensional Check