Precision Measuring Systems » measurement

Opto Gauging M/C for Compressor & Turbine Blades

marposs — Tue, 22 Jun 2010 16:01:37 +0000

Aerospace industries and their subcontractors can find at Marposs a full range of measuring / testing equipment (non destructive testing too) to help with manufacturing and assembling their products:

- In-process gauge heads, touch probes and sensors for machine tools;
- Hand held gauges for various checks;
- Standard gauging components
- Leak testing equipment
- Special, tailor-made gauge fixtures and stations with various levels of automation

M38 – Manual Gauging Station

Advanced Line of Measuring Plugs

marposs — Sun, 20 Sep 2009 20:16:35 +0000

M1 STAR™ MBG
Manual Mechanical Bore Gauge with Mechanical or Electronic Dial Indicators or Pencil Probe

The highly advanced line of measuring plugs for inspecting bore diameters: M1 Star™

* The mechanical transmission measuring system can be interfaced with any pencil probe, dial or digital indicator.

* Application range is 3 to 300 mm (0.12 to 11.81″). With an extensive range of accessories, the M1 Star™ MBG can be configured to measure at depths of more than 500 mm and measure bores that are perpendicular to the axis of insertion.

* The wide range of modular components makes it possible to configure the bore gauge to meet all measuring needs.

* The bore gauge can be totally retooled or reconditioned by simply replacing the nosepiece and contacts. A mechanical positioning system automatically ensures alignment between the nosepiece and contacts.

* Due to the mechanical transmission system having an extensive range of accuracy, only one master is needed for zero setting.

* The Mechanical Bore Gauge is accurate, robust and reliable. Only periodic cleaning of the mechanical measurement-transmission area is necessary.

To know more about the M1 Star™ line of measuring plugs

Marposs post-process measuring systems applied on Grinders

marposs — Thu, 13 Aug 2009 13:52:51 +0000

Marposs post-process measuring systems carry out the measurement soon after machining, and generate feedback and compensation signals to the machine tool check.

These are simple or sophisticated measuring stations, dedicated or flexible, manual or automatic, self-standing or completely integrated in the active (conveyors and/or robots) or passive (rolling) part transfer system.

To know more: Marposs post-process measuring systems applied on Grinders

Multidimensional Modular System Retoolable for Shaft-Like Parts Measured Either With Vertical Or Horizontal Axis.

marposs — Sun, 12 Jul 2009 13:26:42 +0000

Its flexibility guarantees quick retooling without any special tools, using shop-floor components available off the shelf.
We are talking about the Quick Set™, a retoolable modular system that can be assembled in three different gauging configurations to build measuring tools.

Follow the link if you need more information about the Multidimensional Modular System Retoolable for Shaft-Like Parts Measured Either With Vertical Or Horizontal Axis.

LVDT and HBT Analog Pencil Probe Line – Red Crown

marposs — Sun, 28 Jun 2009 20:43:32 +0000

The Red Crown pencil probes line fulfils quality control requirements in the workshop.

Reliability and durability are assured in all models through innovative design and the use of the most suitable materials, developed thanks to TESTAR’s extensive experience in the quality control sector.

Red Crown pencil probes assure precision measurements, even below one micron, and contribute to the quality of measurement data.

Red Crown product line offers:

Comprehensive product range
High quality and precision
Competitive prices
Short delivery
Durability

Optoquick Set – Optoelectronic Flexible Bench for Inspection of Shaft

marposs — Tue, 26 May 2009 14:43:24 +0000

The Optoquick Set measuring system has been conceived for working directly on the shop floor, without the need to locate in a laboratory environment.
The spectrum of the checks the Optoquick Set can do is wide open. Among them:

Journal Diameters and related roundness and taper
Lengths and widths
Complete undercut inspections (Diameter, Radius, Width)
Run-out to a mechanical axis
Angles, chamfers, fillets

To know more follow the link: Optoquick Set – Optoelectronic Flexible Bench for Inspection of Shaft

Automatic Equipment for non Destructive Test of Surface Defects and Dimensional Check

marposs — Wed, 29 Oct 2008 09:50:10 +0000

N. D. Test and Dimensional Measurement of Cylinder Bores

The manufacturing process of cylinder bores of automobile engines can often cause the formation of porosity (resulting from fusion in aluminium or cast iron cylinder bores) or cracks in steel cylinder liners. The need of both a Non-Destructive inspection to detect superficial defects as well as the typical dimensional controls has driven the integration of Eddy Current and pneumatic technology in a single plug.

N. D. Test on Centerless Grinder

marposs — Mon, 29 Sep 2008 09:58:39 +0000

Non Destructive Test During The Grinding Process on a Centerless Through-feed Machine

The ever-increasing demand for global quality control of the entire production requires technical solutions that can guarantee the best performances at a reasonable cost.

Check for yourself: N. D. Test on Centerless Grinder.

Conventional Rockwel Hardness Testing Equipment for Shafts Like Parts

marposs — Wed, 16 Jul 2008 22:39:49 +0000

The new Marposs hardness measuring fork has been conceived for an easier and more friendly use on the shop floor environment. It’s wide inspection range allows testing all the crankshaft`s families without any kind of mechanical tooling;

Applications

The ergonomic and compact design makes the fork suitable for different solutions such as manually loaded benches or fully automatic machine for the inspection of 100% of production.

and more…

To know more log on to the Hardness Testing page.

M63 Measuring System

marposs — Tue, 20 May 2008 15:35:42 +0000

Manual gauging station for inspection of ring-like components (bushings)

The M63 bench is an innovative measuring system with the following strengths: simple and efficient in design, compact and robust.

The bench gauge is dedicated to the final or interoperational inspection of a single bushing type part (vertical axis, radial symmetry and weighing less than 15 Kg/33 lb).

The part is manually loaded and referred on a nosepiece or a descending pivoting arm.

The most recent Marposs measuring transmissions belonging to the AMA line are utilized in the gauge design (made with non-magnetic stainless steel) and with Red Crown pencil probes. These measuring components are mounted to a counterplate fixed to the part support plate by three columns.

This mechanical solution completely isolates the measuring structure from the weight of the part, assuring the highest metrological performances.

If required by the application, the measuring transmissions can be provided with pneumatic retraction. The actuation of the rear measuring group can be manual or pneumatic.

The new M63 bench replaces the Marposs Universal Quick Set bench when no retooling is needed and is provided with guarding for the rear measuring group.

The gauge system can be provided with either static or dynamic capabilities for dimensional and geometric inspection of I.D.’s and/or O.D.’s.

Vertical Station for Manual Inspection of Shafts – M67

marposs — Mon, 05 May 2008 18:08:58 +0000

The M67 bench is an innovative measuring system with the following strengths: simplicity and efficient in design, compact and robust.

Its bracketry and guarding are manufactured using Laser Cutting technology which can be easily integrated with CAD systems. This reduces both preparation times and costs for manufacturing of individual details.

The bench is dedicated to the final or interoperational inspection of a single part type weighing less than 6 Kg.

The measuring components are realized with the most recent Marposs measuring transmissions belonging to the AMA line (made in non-magnetic stainless steel) and with Red Crown pencil probes.

The workpiece is manually loaded in the vertical position and referred between centers that are either fixed or motorized.

To know more log on to the: Vertical Station for Manual Inspection of Shafts – M67

Vertical Bench for Shaft Inspection M57V

marposs — Thu, 20 Mar 2008 07:49:34 +0000

The M57V bench is an innovative measuring system which offers simplicity through the efficiency of its design, as well as being compact and robust.

The vertical solution provides a much smaller foot print which takes up a limited amount of surface space as compared to the horizontal solution. In addition, vertical loading of the part eliminates part and structural deformation, as well as any bending in the reference centers and helps part dragging in dynamic applications.

The bench, engineered for crankshafts weighing more than 6 Kg, can also check camshafts, gear shafts, rotors and axle shafts.

The measuring components are comprised of the Marposs measuring transmission devices belonging to the AMA line (made of non-magnetic stainless steel) and Red Crown pencil probes. Other cell types can be used in special applications. The bench gauge is dedicated to the inter-operational inspection of a single part type after end face milling, turning, pin bearing milling and grinding. The work piece is loaded manually or by a manual gantry between centers in the vertical position. The centers are either fixed (static measurement) or motorized (dynamic measurement) and the measuring stations are brought onto the part by manual pivoting arms.

To know more follow the link: Vertical Bench for Shaft Inspection M57V

Measuring Station for CAM Profile Inspection – M57 Profile

marposs — Tue, 15 Jan 2008 17:03:17 +0000

RELIABLE, PRECISE, FAST
Rugged enough to be used in a workshop environment.
Can be integrated into production lines for inter-operational and final inspection. Reliable and accurate, designed and built using the most advanced engineering methods.

Due to a combination of multiprocessor electronics provided with dedicated algorithms, repeatability and accuracy are guaranteed comparable to those obtained in Metrological Laboratory.

Capable of maintaining reduced cycle times and quality control of an entire production run.

To know more follow the link: Measuring Station for CAM Profile Inspection – M57 Profile

M39s – Scanning System

marposs — Sun, 18 Nov 2007 15:17:08 +0000

M39s (Scanning System)

Measuring System for the Profile Check of Inside and Outside Diameters

Scanning technology is an essential tool for functional control of components produced under high accuracy matching and assembly conditions.
This system not only inspects and graphically displays the dimensional profile of the matching surfaces along their global extension, but also provides indications for the process control of the machine.
By using different measuring elements, the diameter of a bore or an outside diameter can be inspected, along its total length.
The measured values contain detailed information about the diameter and the cylindrical form, which determine the matching conditions or classification.
The use of standard components and a robust mechanical design guarantee excellent performances for years in the shop floor environment.

To know more follow the link: Measuring System for the Profile Check of Inside and Outside Diameters

No related posts.

M2016 Flexible Contact Measurement System

marposs — Sun, 12 Aug 2007 22:33:47 +0000

The M2016 system has been designed for:

Inspection of rotating parts loaded with horizontal axis (e.g. families of shafts)

Use in demanding shop-floor environments immediately after a machining operation thanks to its low sensitivity to dirt and to part surface roughness

The two bi-directional measuring heads provide gauging flexibility at operating rates significantly faster than possible with other devices available in the market today.

Reliable and accurate, it can statically or dynamically perform many types of dimensional and geometric checks, including:

Diameters Distances Concentricity Ovality Barrel shape Taper Straightness Parallelism Radial runout
Axial runout

Marposs Quick SPC‚Ñ¢ software allows for an on-line variable data analysis. The use of the Flex Add-On software lets the operator easily program a new part type. Its feedback capabilities make the M2016 an integral part of the production system.

To know more log on to: M2016 Flexible Contact Measurement System

Optoquick Set – Optoelectronic Flexible Bench for Inspection of Shaft

Automatic Measuring Machine M128

marposs — Fri, 29 Jun 2007 13:27:28 +0000

Automatic Measuring Machine for Inspection of Conrods

Reliable
In the field of measurement the M128 system is designed and manufactured with the help of the most advanced engineering methods, making it an extremely reliable and precise checking instrument in workshop environment.

Complete
The M128 is provided with all the systems necessary for the integration within a manufacturing line. The capacity to keep cycle times within 7 seconds, assures the check of 100% of parts, allowing quality check of the whole production.

Versatile
The M128 system due to a series of stations and accessories, satisfies all the requests related to measure, con-rod identification and selection.

Competitive
The possibility to customize the M128 system M128 according to production and measurement requirements, allows for determining the proper gauging solution for cost-effective connecting rod testing.

To know more about this kind of measurement and the Automatic Measuring Machine M128, follow the link:
Automatic Measuring Machine M128 for Inspection of Conrods

Automatic Measuring Machine M125

marposs — Thu, 21 Jun 2007 22:53:20 +0000

Automatic Measuring Machine for Inspection of Cylinder Block and Head

Versatile
The M125 system, thanks to its strength, was born to measure in workshop environment. It is able to offer, together with dimensional, geometric and Non-Destructive (ND) checks, additional functions such as marking, part selection and back-up area.

Reliable
The M125 system is designed and manufactured with the help of the most advanced engineering methods, making it an extremely reliable and precise checking instrument in the workshop environment.

Complete
The M125 is provided with all the systems necessary to meter and transfer parts coming from the manufacturing line automation. The capacity to provide for reduced cycle times, assures the check of 100% of parts, allowing the quality check of the whole production.

To know more about the Automatic Measuring Machine M125: Automatic Measuring Machine for Inspection of Cylinder Block and Head

Automatic Measuring Machine M110 Profile

marposs — Fri, 15 Jun 2007 23:01:03 +0000

Automatic Measuring Machine for CAM Profile Inspection

Reliable, Precise, Fast
Rugged enough to be used in a workshop environment.
Can be integrated into production lines for inter-operational and final inspection. Reliable and accurate, designed and built using the most advanced engineering methods.
Due to a combination of multiprocessor electronics provided with dedicated algorithms, repeatability and accuracy are guaranteed comparable to those obtained in Metrological Laboratory.
Capable of maintaining reduced cycle times and quality control of an entire production run.
Optional functions include part marking and part segregation.

To know more: Automatic Measuring Machine M110 Profile

Automatic Measuring Machine M110 Optoflex

marposs — Fri, 01 Jun 2007 18:23:55 +0000

Automatic Flexible Measuring Machine for Optoelectronic Inspection of Shafts

Versatile

Thanks to its rugged design, the M110 Optoflex is perfect for measurement expecially for measuring parts in the shop floor environment. It can be integrated into a production line for inter-operational or final inspection of parts and can be used as an audit station or for post-process inspection after the machine tool.

Flexible

A characteristic of the M110 Optoflex is the very high level of flexibility. The use of shadow cast optoelectronic technology allows for the inspection of a great variety of shafts while performing many different types of measurement, without the necessity of retooling and without part contact.

Reliable

The M110 Optoflex is designed and built using the most advanced engineering methods, making it an extremely reliable and accurate instrument for measurement.

Follow the link to know more: Automatic Measuring Machine for Optoelectronic Inspection of Shafts